Mapei Mapeguard WP 200 - Waterproofing & Decoupling Membrane, Alkali-resistant, waterproofing and decoupling membrane under ceramic and natural stone tiles.
Mapei Mapeguard WP 200 - Waterproofing & Decoupling Membrane, Alkali-resistant, waterproofing and decoupling membrane under ceramic and natural stone tiles
WHERE TO USEWaterproofing and decoupling membrane, made of soft polyethylene, for direct application under ceramic and natural stone tiles with thin-set mortar.
SOME APPLICATION EXAMPLES
Mapeguard WP 200 is a bonded waterproofing and decoupling membrane used in wet and damp areas in residential and commercial buildings such as domestic and hotel bathrooms, private or commercial showers, whorls of swimming pools and small size balcons
Waterproofing membrane on moisture-sensitive substrates (such as gypsum plasters and gypsum fiber boards, calcium sulphate screeds) and mineral surfaces (such as cement plaster, porous concrete, concrete, cement screed, cement-based panels).
Anti-Fracture membrane to prevent cracked tiles where movement / thermal stress may be present. For example, installing on a challenging substrate such as a heated floor system.
Mapeguard WP 200 is a flexible, thin-layer, waterproof isolating sheet of polyethylene, coated on both sides with a non-woven polypropylene fabric. The non-woven fabric ensures a relevant bond strength of the adhesive between the membrane and the substrate/covering.
Colour - Grey
Total Width - 1000mm (+/-5mm)
Total Thickness (approx) - 0.44 - 048mm
Material Weight (approx) - 251 - 256 g/sq./m
Resistant to Temp min/max - -30 / +90 degree celsius
High tensile strength.
High tensile bond strength adhesive connection with tile adhesives.
Do not useMapeguard WP 200if the environmental temperature is lower than +5°C.
The use ofMapeguard WP 200as a decoupling membrane does not avoid the need of movement joints.
Mapeguard WP 200is not permanent UV-resistant and so it has to be covered with a ceramic or natural stone.
All the in force national peculiarities and guidelines have to be observed. Do not apply any smoothing layer after the bonding of Mapeguard WP 200
For technical data and more information about this product please click on the link below: Mapei Mapeguard